Max 15W STD

Features:

1.Private model products

2.The sealing level reaches the IP54, and the first floor is completely sealed. In the use, the dust and smoke oil can be avoided into the chassis, so that the life and brightness of the extended laser can be extended.

3.The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.

Laser power	15W [Red: 4.5W 638nm; Green: 4.5W 525nm; Blue: 6W 455nm]
Cooling method	the whole machine is cooled by air cooling
Control signal mode	TTL/analog automatic switching
Modulation voltage	≦100K
Laser divergence angle	<1.2mrad (full angle)
Laser spot size	5*6.2mm at the light outlet
Galvanometer	30/40kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm)
Scanning angle	up to 60°
Laser service life	≥10000 hours (maintain the test results in a constant temperature environment)
Laser class	Class IV
IP rate	IP54
Control mode	SD (built-in more than 300 effects), sound control, automatic operation, DMX 18/27 channels (with RDM), master/slave mode, ILDA software control
Back Controls	LCD, 3-pin 512 in/out, DB25 in/out, key switch, remote in/out, power in/out, fuse
Working temperature	-10C-45°C
Voltage	100-250V
Rated power	250W
Applicable	Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc..
Warranty	1 years
Size	213416.5cm/27cm (LWH)
Net Weight	10kgs
Carton Packing	453122cm
Gross Weight	11kgs
Flightcase size	453623cm
Gross weight	16kg