STORM IP65 70W PRO MAX FB4

Features:

1.The sealing level reaches the IP65

2.The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.

3.RGB easy to align external

4. 4 way Masking plate

5.Silent system; automatically adjusts fan speed based on temperature.

6.Safety systems: Electric shutter, E-stop

7.Build in Genuine FB4

8.Low divergence angle

9.Digital driver

Laser power	70 watts (Red: 20w/638nm Green: 20w/525nm Blue: 30w/455nm)
Cooling method	The laser is cooled with TEC, and the whole machine is cooled by air cooling
Control signal mode	TTL/analog automatic switching Modulation voltage: ≦100K
Laser divergence angle	<0.8mrad (full angle)
Laser spot size	10*10mm at the light outlet
Galvanometer	30kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm)
Scanning angle	up to 60°
Laser service life	≥10000 hours (maintain the test results in a constant temperature environment)
Laser class	Class IV
IP rate	IP65
Control mode	American pangolin FB4 control panel,SD automatic operation, DMX, ILDA
Back control	FB4 LCD screen, FB4 network in/out, 3PIN/5PIN 512 in/out, DB25 in/out, key switch, remote in/out, power in, fuse
Working temperature	-10C-45°C
Voltage	100-250V
Rated power	450W
Applicable	Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc.
Warranty	2 years
Product size	322123cm/45cm
Product size	40kgs
Heavy duty case	845634
Gross weight	60kg