Features:
* Private model products
*The sealing level reaches the IP65
* The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.
*Build in Genuine FB4
*RGB easy to align external
*4 way Masking plate
| Laser power | 62 watts (Red: 16w/638nm Green: 18w/525nm Blue: 28w/455nm) |
| Cooling method | The laser is cooled with TEC, and the whole machine is cooled by air cooling |
| Control signal mode | TTL/analog automatic switching Modulation voltage: ≦100K |
| Laser divergence angle | <1mrad (full angle) |
| Laser spot size | 10*10mm at the light outlet |
| Galvanometer | 30kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm) |
| Scanning angle | up to 60° |
| Laser service life | ≥10000 hours (maintain the test results in a constant temperature environment) |
| Laser class | Class IV |
| IP rate | IP65 |
| Control mode | American pangolin FB4 control panel, automatic operation, DMX, master/slave mode, ILDA |
| Back control | FB4 LCD screen, FB4 network in/out, 3-pin 512 in/out, DB25 in/out, key switch, remote in/out, power in, fuse |
| Working temperature | -10C-45°C |
| Voltage | 100-250V |
| Rated power | 450W |
| Applicable | Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc. |
| Warranty | 2 years |
| Product size | 32*21*23cm/45cm |
| Product size | 40kgs |
| Heavy duty case | 84*56*34 |
| Gross weight | 60kgs |








Copyright © Guangdong Knight Photoelectric Technology CO.,LTD. All Rights Reserved - Privacy Policy