R-30 42w rgb laser light

Features:
1. Private model products
2. The sealing level reaches the IP65
3. The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.
4. Build in An2 AI Show Software
5.Build in Genuine FB4 Optional

Laser power:	42w (Red: 12w/638nm Green: 13w/520nm Blue: 18w/450nm)
Cooling method:	The laser is equipped with TEC refrigeration, and the whole machine is air-cooled to cool down
Control signal mode:	TTL/analog automatic switching Modulation
modulation voltage:	≦100K
Laser divergence angle:	<1.6mrad (full angle)
Laser spot size:	the size of the light outlet≦8mm
Galvanometer:	AT50LB 30kpps galvanometer high-quality dielectric film reflectivity >99% @45° incident (coverage wavelength: 400nm-680mm)
Scan angle:	+- 30° (60°)
Laser service life:	≥10000 hours (test results in the constant temperature environment)
Laser level:	Class IV
IP rate：	IP65
Control mode:	SD (built-in more than 200 effects), sound control, automatic operation, DMX 18/27 channels (with RDM), master/slave mode, ILDA software control
Back control:	AT-S5 LCD, 3-pin 512 in/out, DB25 in/out, key switch, remote in/out, power in, fuse
Work temperature:	-40-50° (built-in constant temperature system)
Power supply:	110V-240v 50Hz/60Hz
Rated power:	380W
Application:	Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc..
Warranty:	2 year
Product Size:	574522cm/43cm Net weight: 40kgs
carton Packing ：	6142331cm Gross Weight: 28kgs
Power consumption:	1000 watts